Installation Support | Blanc de Juillet
CURTAIN RAIL

Installation on a Curtain Rail

The basic method is the A-hook style, where hooks are attached to the upper row of the pleated tape. Hang the hooks on the curtain rail runners at approximately 10–12 cm intervals.

  • The A-hook style is a light finish that leaves the rail slightly visible.
  • It fits beautifully into ceiling-mounted curtain boxes.
  • If you want to hide the rail, use the B-hook style, where hooks are attached to the lower row of the pleated tape.
  • By moving the hooks up or down, you can adjust the length by approximately 3 cm.
Installation Steps
  1. Check the number of hooks on the curtain.
  2. Check the number of curtain rail runners.
  3. Hang the hooks on the runners starting from the side you want to secure.
  4. Hang the remaining hooks in order and adjust the overall spacing.
A-hook finish
A-hook Front View
A-hook Back View
B-hook finish
B-hook Front View
B-hook Back View
Pole Installation Front View
Pole Installation Back View
CURTAIN POLE

Installation on a Curtain Pole

Attach hooks to the pleated tape, then hang them on the holes at the bottom of the rings threaded onto the curtain pole. Aim for approximately 10–12 cm intervals.

  • The B-hook style is recommended to minimize the gap between the pole and the fabric.
  • Adding more rings or hooks to create finer spacing will result in a neater appearance.
Installation Steps
  1. Check the number of hooks on the curtain.
  2. Check the number of rings on the curtain pole.
  3. First, hang the ends of the curtain on the rings.
  4. Hang the remaining hooks in order and adjust the overall spacing.
CURTAIN RAIL

Installation on a Curtain Rail

To make them compatible with Japanese-style curtain rails, openable rings are added to the rail runners, and the ribbons are tied through them.

  • You can choose whether or not to include openable rings in the product page options.
  • If desired, we can add pleated tape while leaving the ribbons intact, allowing the curtains to be hung with hooks.
  • When installing with ribbons, the structure naturally leaves a small gap between the rail and the fabric. If you want to minimize this gap, we recommend adding pleated tape.
  • If there is a curtain box, the tied ribbons will be mostly hidden.
Installation Steps
  1. Lift the curtain to a convenient installation position while supporting it with your shoulder or another hand.
  2. Check the number of ribbons and the number of rings attached to the rail.
  3. First, tie the ribbons at both ends of the curtain through the rings.
  4. Tie the remaining ribbons in order and adjust the overall spacing.
Ribbon Curtains
Ribbon Curtains
Ribbon Curtains
Ribbon Curtains
Ribbon Curtains
CURTAIN POLE

Installation on a Curtain Pole

Thread rings onto the curtain pole and tie the ribbons through them. This is a distinctly French installation method that beautifully decorates the window area.

Aim for approximately 10–12 cm between the rings.

CURTAIN RAIL

Installation on a Curtain Rail

  1. Fold the top to fit the height of the window. For a full, beautiful finish, leave about 10 cm of fabric below the floor rather than making it fit perfectly.
  2. Secure the folded section with clips with hooks at approximately 10–12 cm intervals.
  3. Hang the hooks on the curtain rail runners.

You can choose whether or not to include clips with hooks in the product page options.

Clips with hooks
Fabric
Fabric
CURTAIN POLE

Installation on a Curtain Pole

  1. Fold the top to fit the height of the window. Aim for about 10 cm of fabric below the floor for a reassuringly full finish.
  2. Secure the folded section with curtain rings with clips or clips with hooks at approximately 10–12 cm intervals.
  3. Hang clips with hooks on the pole rings and curtain rings with clips directly on the curtain pole.

Clips with hooks are available in the product page options. Curtain rings with clips are sold separately.

FROM Blanc de Juillet

Change the look of your window and
create a style that is uniquely yours.

Curtains are interior items that can greatly change the impression of a room. In addition to classic pleated curtains, there are many ways to style windows, including ribbon types and casual styles finished with clips.

Enjoy creating styles that are uniquely yours by changing them to suit the season or your mood. At Blanc de Juillet, we provide careful support from proposing custom curtains for your room to discussing sizes.

CHANDELIER INSTALLATION

Chandelier Installation Methods

Foreign-made lighting fixtures are generally designed for direct wiring to the ceiling wiring.
Depending on the product, they may not be compatible with the ceiling sockets commonly found in Japanese homes.

At Blanc de Juillet, we check the weight, structure, and safety of the lighting fixtures,
and for products that can be installed on a ceiling socket, we have them modified to the appropriate specifications by a Japanese electrician before delivery.

For products that are unsuitable for installation on a ceiling socket due to their weight or structure, we recommend them as is, with a direct-wiring specification, to prioritize safety.

For products with a direct-wiring specification, please be sure to hire an electrician for installation. It is extremely dangerous to attempt installation yourself.
Chandelier
INSTALLATION METHOD

Difference Between Ceiling Sockets and Direct Wiring

Please check the installation specifications on the product page, and install the product using the method that is appropriate for it.

Ceiling Socket
CEILING SOCKET

What Is a Ceiling Socket?

This is a common installation method in Japanese homes where the plug of the lighting fixture is inserted into the wiring fixture installed on the ceiling, and turned to secure it.

It can be installed without electrical work, but it may not be compatible depending on the weight and structure of the chandelier.

At Blanc de Juillet, only for products that can be used safely, we modify them to be compatible with ceiling sockets before delivery.
Direct Wiring
DIRECT WIRING

What Is Direct Wiring?

This is an installation method where the wiring of the ceiling and the wiring of the lighting fixture are connected directly, and the fixture is secured to the ceiling.

This is a common specification for foreign-made chandeliers, but an electrician's license is required for installation.

For heavy products or products that are unsuitable for ceiling sockets due to their structure, we recommend them as is, with a direct-wiring specification.
PLACEMENT

Chandelier Placement

In Japanese homes, placing the chandelier above furniture rather than in the center of the room creates a beautiful balance while reducing the sense of confinement.

Avoid areas where people walk,
and center it over the furniture.

In foreign countries, ceilings are high, and it is common to hang chandeliers in the center of the room, but in Japanese homes, we recommend installing them above tables, sofas, beds, and other furniture.

Using furniture as a reference naturally draws the eye, and creates a balanced look between the chandelier and the overall space. It also reduces the chance of people walking directly underneath and hitting their heads.

Above the dining table
Above the coffee table or sofa
At the foot of the bed
Above the console table
In an open-ceiling area or stair hall
Direct Wiring
HEIGHT GUIDE

Installation Height Guide

Adjust the height according to the height of the furniture and the size of the chandelier. The following are approximate guidelines from the floor to the lowest part of the chandelier.

DINING

Above the dining table

Approximately 165 cm

Since there is a table, people rarely walk directly underneath, and hanging it lower highlights the beauty of the chandelier.

LIVING

Sofa or living room

Approximately 175–180 cm

This height makes it difficult to hit your head when standing up, and allows you to enjoy its presence while reducing the sense of confinement.

BEDROOM

At the foot of the bed

Approximately 160–170 cm

It is easier to install slightly lower above the bed, and creates a hotel-like impression.

OPEN CEILING

Open-ceiling area or stair hall

A height where the entire chandelier is visible

Use the position where the entire chandelier looks beautiful when viewed from the first floor as a reference.

In areas where people walk, please ensure a height that prevents people from hitting their heads. If it is above furniture such as a table, sofa, or bed, it can be installed slightly lower.
FAQ

Frequently Asked Questions

Can you recommend an installer if I cannot find one?
Yes. If you cannot find an installer nearby, we will guide you to installers in your area to the extent possible. We can introduce installers to customers in Tokyo and its surrounding areas, as well as in Hyogo and Osaka Prefectures. Please coordinate the installation date and time directly with the installer after they have been introduced.
How much does it cost to install the chandelier?
The reference installation price is approximately 25,000–30,000 yen. It varies depending on the product, the condition of the ceiling, the scope of work, and the region.
Is ceiling reinforcement required?
Most products do not require special reinforcement work. It varies depending on the weight of the product and the structure of the ceiling. The weight is listed on the product page, so please check with your installer before installation. Please check with your installer before installation.
Can the length of the cord or chain be adjusted?
Yes. We offer length adjustment for an additional fee. If you send us photos of the installation area, the ceiling height, and the dimensions of the furniture, we will suggest a well-balanced length.
HOW TO ORDER

Consultation Process

We will check the installation area and product specifications, and guide you on the necessary installation method and processing.

STEP 1

Contact Us

Please contact us via the reservation form or LINE.

STEP 2

Confirm Photos and Dimensions

We will check the installation area, ceiling height, furniture placement, etc.

STEP 3

Installation Method Guidance

We will suggest the necessary work and processing, as well as the installation position and height.

STEP 4

Construction and Installation

We will coordinate the date and time with the installer as necessary and perform the installation.

STEP 5

Completion

The process is complete after checking the balance between safety and finish.

Enjoy your Interior.
Brand Julie

Photos of the Installation Area

Please send us photos that show the entire room, the planned installation area, and the ceiling wiring fixtures.

Brand Julie

Dimensions and Product Information

Please prepare the ceiling height, furniture dimensions, window dimensions, the product page URL, etc.

CONTACT

Consultation Reservations and Inquiries

It is okay even if you are not sure whether it can be installed.
Please send us the product URL and photos of the installation area.

Reservation

Consultation Reservation

If you wish to visit our store or have an online consultation, please apply via the reservation form.

To the reservation form
LINE

Inquiries via LINE

You can easily contact us via LINE while sending photos of the installation area and the product page URL.

Consult via LINE
Photos We Would Like You to Send

Please take photos with the following as a reference so that the relationship between the installation area and the surrounding furniture is clear.

  1. Photos of the entire room, including the walls, ceiling, and floor
  2. Photos taken from the opposite side
  3. Close-ups of the ceiling wiring fixtures and the planned installation area
Photos of the entire room and how to take photos from the opposite side